Getriebe
56JMS
Planetary gearboxes - JMS series
| Length (L) (mm) |
37,8 - 60,8 |
| Reduction Ratio |
3,6 - 76,77 |
| Nominal Output Torque (Nm) |
9 -30 |
GP56 -S
Planetary gearboxes - GP series
| Length (L) (mm) |
50,6 - 67,8 |
| Reduction Ratio |
3,293 - 62,326 |
| Nominal Output Torque (Nm) |
7,73 - 26,48 |
| Max. Input Speed (rpm) |
4658 - 13000 |
GP56 -N - Low noise
Planetary gearboxes - GP series
| Reduction Ratio |
3,24 - 35,05 |
| Nominal Output Torque (Nm) |
1,53 - 15,84 |
| Max. Input Speed (rpm) |
5450 - 9758 |
GP56 -T - Torque
Planetary gearboxes - GP series
| Length (L) (mm) |
54,8 - 86 |
| Reduction Ratio |
3,293 - 256,23 |
| Nominal Output Torque (Nm) |
7,73 - 35 |
| Max. Input Speed (rpm) |
4658 - 13000 |
Motor Steuerungen/Controller
Hercules SOD202
Stepper motor Controllers
| Interface |
Modbus-RTU, CANopen, Modbus-TCP, EtherCAT, Profinet, EtherNet/IP, PowerLink |
| Phase Current up to (A rms) |
2 |
| Open / Closed Loop |
Closed Loop |
Libra SBD205
Stepper motor Controllers
| Interface |
Clock & Direction |
| Phase Current up to (A rms) |
5,5 |
| Peak Current (A peak) |
7,8 |
| Open / Closed Loop |
Open Loop |
Aquarius SBD204
Stepper motor Controllers
| Interface |
Modbus-TCP, EtherCAT |
| Phase Current up to (A rms) |
4,2 |
| Open / Closed Loop |
Closed Loop |
Aquarius SBD207
Stepper motor Controllers
| Interface |
Modbus-RTU, CANopen, Profinet |
| Phase Current up to (A rms) |
7,1 |
| Open / Closed Loop |
Closed Loop |
Sagittarius
Stepper motor Controllers
| Interface |
Modbus-RTU, CANopen, Modbus-TCP, EtherCAT |
| Phase Current up to (A rms) |
7,1 |
| Open / Closed Loop |
Closed Loop |
Andromeda
Stepper motor Controllers
| Interface |
Modbus-RTU, CANopen, Modbus-TCP, EtherCAT |
| Phase Current up to (A rms) |
8,5 |
| Open / Closed Loop |
Closed Loop |
Lyra
Stepper motor Controllers
| Interface |
Modbus-RTU, CANopen, EtherCAT |
| Power Supply |
100 - 240 VAC |
| Phase Current up to (A rms) |
3 |
| Peak Current (A peak) |
4,2 |
| Open / Closed Loop |
Closed Loop |
Draco
Stepper motor Controllers
| Interface |
ModbusRTU, ModbusTCP, CANopen, EtherCAT, Profinet |
| Power Supply |
85 - 265 VAC |
| Phase Current up to (A rms) |
5.2 |
| Peak Current (A peak) |
7.3 |
| Open / Closed Loop |
Closed Loop |
Dorado
Stepper motor Controllers
| Interface |
ModbusRTU, ModbusTCP, CANopen, EtherCAT, Profinet |
| Power Supply |
85 - 120 VAC |
| Phase Current up to (A rms) |
8 |
| Peak Current (A peak) |
11.3 |
| Open / Closed Loop |
Closed Loop |
Encoder
E3 - 3 channels
Incremental Optical Encoders
| Cycles per revolution (CPR) |
100 - 8000 |
| Number of channels |
2 + index |
| Supply Voltage (V) |
5 ±10% |
E4T - 2 channels
Incremental Optical Encoders
| Cycles per revolution (CPR) |
100 - 1000 |
| Supply Voltage (V) |
5 ±10% |
E5 - 3 channels
Incremental Optical Encoders
| Cycles per revolution (CPR) |
100 - 4096 |
| Number of channels |
2 + index |
| Supply Voltage (V) |
5 ±10% |
DE
Suchen
