Schrittmotoren mit integrierter SteuerungUnsere intelligenten Schrittmotoren mit integrierter Steuerung bieten Kompaktheit mit allen Bewegungs-, Geschwindigkeits- und Stromregelfunktionen unserer elektronischen Antriebe. Diese programmierbaren Servo Schrittmotorsysteme in Schutzart IP65 verfügen über einen integrierten Motor, Encoder und einen Motion-Controller mit Kommunikationsschnittstellen verschiedene Feldbusse wie RS485 Modbus-RTU, CANopen, EtherCAT CoE oder Ethernet Modbus TCP.![]() Mehr über Schrittmotoren mit Motion Controller |
![]() |
.

Andere Filter


Produkte
Produkt Suche
Technologie: |
Kategorie: |
ISS57
Stepper with Motion controller
Size (mm) | 57 |
Interface | ModbusRTU, CANopen, ModbusTCP, EtherCAT, Profinet |
Holding Torque (Nm) | 0,55 - 1,89 |
Current/Phase (A) | 2,8 |
Operating Voltage (Vdc) | 12 -48 |
ISI57 -IP65
Stepper with Motion controller
Size (mm) | 57 |
Interface | ModbusRTU, CANopen, ModbusTCP, EtherCAT, Profinet |
Holding Torque (Nm) | 0,55 - 1,89 |
Current/Phase (A) | 2,8 |
Operating Voltage (Vdc) | 12 -48 |
ISS60
Stepper with Motion controller
Size (mm) | 60 |
Interface | ModbusRTU, CANopen, ModbusTCP, EtherCAT, Profinet |
Holding Torque (Nm) | 1 - 3,1 |
Current/Phase (A) | 2,8 |
Operating Voltage (Vdc) | 12 - 48 |
ISI60 -IP65
Stepper with Motion controller
Size (mm) | 60 |
Interface | ModbusRTU, CANopen, ModbusTCP, EtherCAT, Profinet |
Holding Torque (Nm) | 1 - 3,1 |
Current/Phase (A) | 2,8 |
Operating Voltage (Vdc) | 12 - 48 |
ISS86
Stepper with Motion controller
Size (mm) | 86 |
Interface | ModbusRTU |
Holding Torque (Nm) | 3,4 - 12 |
Current/Phase (A) | 3 - 6,2 |
Operating Voltage (Vdc) | 24 - 36 |
